SKF linear bearing unit
LBCR D ball bearing | 8 - 80 mmThe SKF linear bearing unit LUCR D consists of a light-weight, cast aluminium housing provided with a SKF ball bearing LBCR D inside. This ball bearing is manufactured according to ISO 10285 and therefore interchangeable on all ISO-compliant brands. With the purchase of a complete LUCR D bearing unit, you get a complete bearing including bearing house which is ready to be installed. This makes the LUCR D great if you like to buy a ready-made bearing. This bearing unit can only be used in combination with shafts provided with supports at the ends of the shaft.
The SKF linear bearing unit LUCR D is available in sizes between 8 and 80 mm. For each size there are four different versions available so you always get the appropriate bearing unit. If you are unsure which version is the most suitable, the differences are indicated below. If you are still in doubt you can always contact us on +31 (0)85 – 0661258.
Which SKF linear bearing unit LUCR D do I need:
If the bearing may come into contact with liquids it is advisable to take the stainless steel version. A stainless-steel bearing is more resistant and the liquids will therefore not harm the bearing. If the bearing does not come into contact with liquids the standard version will do (stainless steel bearings have the code /HV6).
And last, there is a choice to be made between a bearing -2LS with double lip seals or without seals. The advantage of a two-sided sealed bearing is that it is extra maintenance-friendly. This is because you don’t need to worry about the amount or type of grease to be used. It is also no longer necessary for you to provide the bearings with new grease. Also, the bearings are protected against dust, dirt and moisture. The downside is that these seals provide some friction. This means that about 30% of the power will be lost, it is important to take this into account (bearings with two seal have the code -2LS).
The four different SKF linear bearing unit LUCR D versions briefly explained:
- LUCR D: The standard version of the powerful SKF linear bearing unit LUCR D
- LUCR D/HV6: Made of stainless steel so it can be used in a wet or corrosive environment.
- LUCR D-2LS: Features a two-sided seal, enabling it to be used in a dusty environment.
- LUCR D-2LS/HV6: Made of stainless steel and equipped with a two-sided seal, enabling it to be used in wet and dusty environments.
From: €47.70
Available within 72 hours
(This may differ by variant)
| Standard implementation (Fw) | 2 double lip seal | Width (L) | Heart size (H) | Length (A) | Dynamic load ratings | Static load ratings |
|---|---|---|---|---|---|---|
| LUCR 8 | LUCR 8-2LS | 45 mm | 15 mm | 27 mm | 490 N | 355 N |
| LUCR 12 D | LUCR 12 D-2LS | 52 mm | 18 mm | 31 mm | 1160 N | 980 N |
| LUCR 16 D | LUCR 16 D-2LS | 56 mm | 22 mm | 34,5 mm | 1500 N | 1290 N |
| LUCR 20 D | LUCR 20 D-2LS | 70 mm | 25 mm | 41 mm | 2240 N | 2040 N |
| LUCR 25 D | LUCR 25 D-2LS | 80 mm | 30 mm | 52 mm | 3350 N | 3350 N |
| LUCR 30 D | LUCR 30 D-2LS | 88 mm | 35 mm | 59 mm | 5600 N | 5700 N |
| LUCR 40 D | LUCR 40 D-2LS | 108 mm | 45 mm | 74 mm | 9000 N | 8150 N |
| LUCR 50 | LUCR 50-2LS | 135 mm | 50 mm | 66 mm | 13400 N | 12200 N |
| LUCR 60 | LUCR 60-2LS | 160 mm | 60 mm | 84 mm | 20400 N | 18000 N |
| LUCR 80 | LUCR 80-2LS | 205 mm | 80 mm | 113 mm | 37500 N | 32000 N |
SKF Bearings
SKF is the worldwide leader in the field of bearing technology. The company had acquired this positions thanks to the excellent quality and serviceability of its bearings. The company offers all kinds of bearings from a deep groove ball bearing to a cylindrical roller bearing and from a linear ball bearing to a linear shaft support block. With the purchase of a SKF bearing you are sure to have bought top quality.