SKF hardened precision shaft LJMS

52 - 56 HRC | 12 - 50 mm

The SKF hardened precision shaft LJMS is a solid shaft of stainless steel (X46Cr13 kwaliteit). this shaft can therefor withstand high pressures without deformation. The LJMS has a hardness between 52 and 56 HRC (Rockwell Hardness Scale). The maximum sufrace roughness is Ra 0,3 μm. The LJMS is machined to h6 or h7 tolerances. Thanks to the stainless steel the LJMS is ideal for applications where possible contact with a large number of products including fresh water, dilute acids and alkalis, fruit and vegetable juices may occur.

The SKF hardened precision shaft LJMS is available in sizes between 6 and 50 mm. For each size there are a dozen different modifications possible, to make sure that you get the right shaft. It is possible to modify these shaft tailer-made, based on your technical drawings. If you are unsure which modification is the most suitable, the differences are indicated below. If you are still in doubt you can always contact us on +31 (0)85 – 0661258.

Which SKF hardened precision shaft LJMS do I need?

SKF offers a dozen modification for the LJMS precision shaft for each size. Therefore it is important to make a choice in the shaft size and diameter first. During this selection you should keep in mind the size and type of bearings you want to use. If you want to replace a defective or damaged shaft, we recommend you to look at the code indicated in the shaft and to order the same new shaft.

ESSC 1

Cut with no chamfer only deburr.

ESSC 2

Cut with chamfer.

ESSC 3

Cut with machined 25° chamfer and 90° front surfaces for limited length tolerance or chamfer according to customer specification.

ESSC 4

Cut with machined 25° chamfer, 90° front surfaces and one axial hole

ESSC 5

Cut with machined 25° chamfer, 90° front surfaces and two axial holes

ESSC 6

Cut with chamfer. Provided with radial holes for SKF shaft carrier LRCB

ESSC 7

Cut with chamfer. Provided with radial holes to your specification.

ESSC 8

Cut with chamfer. Mounted on SKF shaft carrier LRCB by default.

ESSC 9

Cut with chamfer. Mounted on SKF shaft carrier LRCC by default.

ESSC 10

The shaft is manufactured according to customer-specific drawing.

From: €27.75
Available within 72 hours
(This may differ by variant)

ORDER NOW

SKF shaft size	Hardness dept
Tot 10 mm	0,5 mm
11 - 18 mm	0,8 mm
19 - 30 mm	1,2 mm
31 - 50 mm	1,5 mm
51 - 80 mm	2,2 mm
81 - 100 mm	3,0 mm

SPECIFICATIONS

SKF Bearings

SKF is the worldwide leader in the field of bearing technology. The company had acquired this positions thanks to the excellent quality and serviceability of its bearings. The company offers all kinds of bearings from a deep groove ball bearing to a cylindrical roller bearing and from a linear ball bearing to a linear shaft support block. With the purchase of a SKF bearing you are sure to have bought top quality.

ORDER NOW