SKF linear ball bearing LBCD D
Self-alinging| 12 - 50 mmThe SKF linear ball bearing LBCR D is a ball bearing with an unique layout of the balls. Thanks to this design the LBCR D can withstand a very heavy load. Like other bearings from the SKF series 3, the LBCR D is suitable for both open and closed bearing housings. These bearings are in the standard version already equipped with standard shield, making them more resistant to dust and dirt. The LBCD D is self-aligning up to +/- 0,5º. This tilting feature compensates for misalignment, which may be caused by inaccuracies in fitting or manufacturing, or by significant bending of an unsupported shaft. In the table below you can see which bearing is suitable for you. The LBCR D is produced upon the guidelines as established in ISO 10285.
The SKF linear ball bearing LBCD D is available in sizes between 12 and 50 mm. For each size there are four different versions available so you always get the appropriate bearing. If you are unsure which version is the most suitable, the differences are indicated below. If you are still in doubt you can always contact us on +31 (0)85 – 0661258.
Which SKF linear ball bearing LBCD do I need:
If the bearing may come into contact with liquids it is advisable to take the stainless steel version. A stainless-steel bearing is more resistant and the liquids will therefore not harm the bearing. If the bearing does not come into contact with liquids the standard version will do (stainless steel bearings have the code /HV6).
And last, there is a choice to be made between a bearing -2LS with double lip seals or without seals. The advantage of a two-sided sealed bearing is that it is extra maintenance-friendly. This is because you don’t need to worry about the amount or type of grease to be used. It is also no longer necessary for you to provide the bearings with new grease. Also, the bearings are protected against dust, dirt and moisture. The downside is that these seals provide some friction. This means that about 30% of the power will be lost, it is important to take this into account (bearings with two seal have the code -2LS).
The four different SKF linear ball bearing LBCD versions briefly explained:
- LBCD D: The standard version of the powerful SKF linear ball bearing LBCD D
- LBCD D/HV6: Made of stainless steel so it can be used in a wet or corrosive environment.
- LBCD D-2LS: Features a two-sided seal, enabling it to be used in a dusty environment.
- LBCD D-2LS/HV6: Made of stainless steel and equipped with a two-sided seal, enabling it to be used in wet and dusty environments.
From: €27.70
Available within 72 hours
(This may differ by variant)
| Standard implementation (Fw) | 2 double lip seals | Outer diameter (D) | Length (C) | No. of ball rows | Dynamic load ratings | Static load ratings | Stainless steel | Stainless steel and 2 double lip seals |
|---|---|---|---|---|---|---|---|---|
| LBCD 12 D | LBCD 12 D-2LS | 22 mm | 32 mm | 6 | 1080 N | 815 N | LBCD 12 D/HV6 | LBCD 12 D-2LS/HV6 |
| LBCD 16 D | LBCD 16 D-2LS | 26 mm | 36 mm | 6 | 1320 N | 865 N | LBCD 16 D/HV6 | LBCD 16 D-2LSHV6 |
| LBCD 20 D | LBCD 20 D-2LS | 32 mm | 45 mm | 7 | 2000 N | 1370 N | LBCD 20 D/HV6 | LVCD 20 D-2LS/HV6 |
| LBCD 25 D | LBCD 25 D-2LS | 40 mm | 58 mm | 7 | 2900 N | 2040 N | LBCD 25 D/HV6 | LBCD 25 D-2LS/HV6 |
| LBCD 30 D | LBCD 30 D-2LS | 47 mm | 68 mm | 7 | 4650 N | 3250 N | LBCD 30 D/HV6 | LBCD 30 D-2LS/HV6 |
| LBCD 40 D | LBCD 40 D-2LS | 62 mm | 80 mm | 7 | 7800 N | 5200 N | LBCD 40 D/HV6 | LBCD 40 D-2LS/HV6 |
| LBCD 50 D | LBCD 50 D-2LS | 75 mm | 100 mm | 7 | 11200 N | 6950 N |
SKF Bearings
SKF is the worldwide leader in the field of bearing technology. The company had acquired this positions thanks to the excellent quality and serviceability of its bearings. The company offers all kinds of bearings from a deep groove ball bearing to a cylindrical roller bearing and from a linear ball bearing to a linear shaft support block. With the purchase of a SKF bearing you are sure to have bought top quality.