SKF linear bearing unit LUCS D

LBCR D ball bearing | Clearance adjustable | 8 - 80 mm

The SKF linear bearing unit LUCS D consists of a light-weight, cast aluminium housing provided with a SKF ball bearing LBCR D inside. This ball bearing is manufactured according to ISO 10285 and therefore interchangeable on all ISO-compliant brands. The LUCS D has a slotted housing with an adjustment screw. With the purchase of a complete LUCS D bearing unit, you get a complete bearing including bearing house which is ready to be installed. This makes the LUCS D great if you like to buy a ready-made bearing. This bearing unit can only be used in combination with shafts provided with supports at the ends of the shaft.

The SKF linear bearing unit LUCS D is available in sizes between 8 and 80 mm. For each size there are three different versions available so you always get the appropriate bearing unit. If you are unsure which version is the most suitable, the differences are indicated below. If you are still in doubt you can always contact us on +31 (0)85 – 0661258.

Which SKF linear bearing unit LUCS D do I need:

SKF offers four different versions of the linear bearing unit LUCS D per diameter size. It is therefore important to make a choice for the inner diameter first. If you want to replace a defective or damaged bearing unit, we recommend you to look at the code indicated in the bearing unit and to order the same new bearing unit.

And last, there is a choice to be made between a bearing -2LS with double lip seals or without seals. The advantage of a two-sided sealed bearing is that it is extra maintenance-friendly. This is because you don’t need to worry about the amount or type of grease to be used. It is also no longer necessary for you to provide the bearings with new grease. Also, the bearings are protected against dust, dirt and moisture. The downside is that these seals provide some friction. This means that about 30% of the power will be lost, it is important to take this into account (bearings with two seal have the code -2LS).

The two different SKF linear bearing unit LUCS D versions briefly explained:

- LUCS D: The standard version of the powerful SKF linear bearing unit LUCS D
- LUCS D-2LS: Features a two-sided seal, enabling it to be used in a dusty environment.

Vanaf: €47.70
Leverbaar binnen één werkdag
(Dit kan verschillen per variant)

BESTEL NU

Standard implementation (Fw)	2 double lip seals	Width (L)	Heart size (H)	Length (A)	Dynamic load ratings	Static load ratings
LUCS 8	LUCS 8-2LS	45 mm	15 mm	27 mm	490 N	355 N
LUCS 12 D	LUCS 12 D-2LS	52 mm	18 mm	31 mm	1160 N	980 N
LUCS 16 D	LUCS 16 D-2LS	56 mm	22 mm	34,5 mm	1500 N	1290 N
LUCS 20 D	LUCS 20 D-2LS	70 mm	25 mm	41 mm	2240 N	2040 N
LUCS 25 D	LUCS 25 D-2LS	80 mm	30 mm	52 mm	3350 N	3350 N
LUCS 30 D	LUCS 30 D-2LS	88 mm	35 mm	59 mm	5600 N	5700 N
LUCS 40 D	LUCS 40 D-2LS	108 mm	45 mm	74 mm	9000 N	8150 N
LUCS 50	LUCS 50-2LS	135 mm	50 mm	66 mm	13400 N	12200 N
LUCS 60	LUCS 60-2LS	160 mm	60 mm	84 mm	20400 N	18000 N
LUCS 80	LUCS 80-2LS	205 mm	80 mm	113 mm	37500 N	32000 N

SPECIFICATIES CAD TEKENING

SKF Lagers

Wereldwijd is SKF marktleider op het gebied van lagertechniek. Deze positie heeft het bedrijf verworven dankzij de uitmuntende kwaliteit en onderhoudsvriendelijkheid van haar lagers. Het bedrijf biedt alle soorten lagers aan van een groefkogellager tot een cilinderlager en van een lineair kogellager tot een lineair asbok. Met de aankoop van een lager van SKF weet u zeker dat u top kwaliteit in huis heeft. Vanwege zijn lange levensduur en onderhoudsvriendelijk karakter verdienen de lagers van SKF zich dubbel en dwars terug.

BESTEL NU