SKF profile rail carriage LLTHC LA
Flanged model | High load ratings | 20 - 45 mmThe SKF profile rail carriage LLTHC LA is a flanged model carriage. The LLTHC A is manufactured according to DIN 645-1 and therefore interchangeable in terms of construction within all DIN-complaint brands. Because of the X-arrangement the LLTHC LA is more self-aligning than most other profile rail carriages. This also contributes in the amount of friction being created between carriage and rail. The LLTHC LA has an extended length and therefore capable of higher load ratings. The integrated lubricant reservoirs constantly re-lubricate the circulating balls to decrease maintenance. The LLTHC LA matches the dimensions of DIN 645-1. You can choose from three different preload and accuracy classes. The LLTHC A is available in sizes between 15 and 45 mm.
If you are unsure which size or implementation is the most appropriate for you, the differences are written below. If you are still in doubt you can always contact us on +31 (0)85 – 0661258.
Preload and accuracy classes
Preload classes
To adjunct a profile rail guide to the specific demands of a given application, it is advisable to choose an appropriate preload. This will positively affect the operating behavior of the entire linear guidance system. Preload increases the stiffness of linear guides and thus reduces the deviation under load. You can choose between three different preload classes:
- T0 – Zero preload: For extremely smooth-running rail guide systems with low friction and low external influences. This preload class is only available in P5 and P3 accuracy calsses.
- T1 – Light preload: For precise rail guide systems with low external load and high requirements for overall stiffness
- T2 – Medium preload: For precise rail guide systems with high external load and high requirements for overall stiffness. Also recommended for single-rail systems.
Accuracy classes
The Accuracy class define the maximum permissible tolerance range of rail system in terms of height, width and parallelism. This choice determines the positioning accuracy of the system within the application. There are three different accuracy classes available for each carriage:
- P5 – standard: ± 100 µm height- and ± 40 µm width tolerance.
- P3 – medium: ± 40 µm height- and ± 20 µm width tolerance.
- P1 – heigh: ± 20 µm height- and ± 10 µm width tolerance.
From: €99.33
Available within 72 hours
(This mau differ by variant)
| Implementation | Length (L1) | Width (W1) | Height (H) | Distance between the mounting holes (L3) | Dynamic load ratings | Static load ratings |
|---|---|---|---|---|---|---|
| LLTHC 20 LA T- P- | 88,2 mm | 63 mm | 30 mm | 40 mm | 15200 N | 32700 N |
| LLTHC 25 LA T- P- | 104,1 mm | 70 mm | 36 mm | 45 mm | 24400 N | 44600 N |
| LLTHC 30 LA T- P- | 125,4 mm | 90 mm | 42 mm | 52 mm | 33900 N | 60800 N |
| LLTHC 35 LA T- P- | 142,5 mm | 100 mm | 48 mm | 62 mm | 45000 N | 79400 N |
| LLTHC 45 LA T- P- | 167 mm | 120 mm | 60 mm | 80 mm | 72400 N | 121400 N |
SKF
Wereldwijd is SKF marktleider op het gebied van lagertechniek. Hieronder vallen ook de rail en loopwagen toepassingen van SKF. Deze positie dankt SKF aan de uitmuntende kwaliteit en onderhoudsvriendelijkheid van haar lagers en loopwagens. Deze eigenschappen zijn in alle producten van SKF terug te vinden. Of het nu gaat om kogellagers, lagereenheden, loopwagens of een van de tientallen andere producten die SKF aanbiedt. Met de aankoop van een product van SKF weet u zeker dat u top kwaliteit in huis heeft. Vanwege zijn lange levensduur en onderhoudsvriendelijk karakter verdienen deze zich dubbel en dwars terug.