• Contact

    SUPPORT+31 (0)85 - 066 12 58

SKF linear bearings and units

✔ Fast delivery
Thanks to our own, large stock we can deliver within 72 hours in the United Kingdom.

✔ Tailor made products
We are able to modify products on your request.
TO WEBSHOP

✔ Professional support
We would be glad to help you choose the right product.

The SKF linear bearings and units that we offer can be divided into four groups. The four groups contain the entire linear shaft guides range that SKF has to offer. In order to make a good choice we advise you to make a selection in these groups:

If you need advice on the type and implementation of the bearing (unit) that is most suitable for your problem, we would be glad to help. During working hours you can contact us on the following number +31 (0)85 – 0661258.

All SKF linear bearings and units are factory pre-lubricated with high-performance SKF LGEP2 by default. Due to the integrated grease reservoir, most applications will not require relubrication because the theoretical relubrication interval exceeds the bearing life. The linear bearing units are available in different single, tandem, duo and quadro versions.

✔ Fast delivery
Thanks to our own, large stock we can deliver within 72 hours.

✔ Tailor made products
We are able to modify products on your request.

✔ Professional support
We would be glad to help you choose the right product.

SKF series 1 linear ball bearings, plain bearings and bearing units

Both the SKF series 1 linear ball bearings and the series 1 plain bearings are manufactured according to ISO 10285. Thereby the SKF bearings are interchangeable within all ISO-compliant brands. The bearings from series 1 are of compact dimensions and limited in the load ratings. All SKF bearings from series 1 come in different sizes and implementation so you always get the appropriate bearing. SKF bearings series 1 are an economical choice.

Covered by the series 1: LBBR, LPBR, LUHR, LUJR. LTBR, LTDR, LQBR.

SKF linear series 1

SKF series 3 linear ball bearings, plain bearings and bearing units

Like the SKF bearings from series 1, the SKF series 3 ball and plain bearings are manufactured according to ISO 10285. The SKF series 3 bearings are more advanced than the bearings of series 1. This means that bearings from series 3 can handle higher load ratings. The linear ball bearings from series 3 also provide, in addition to the standard variant, a self-adjusting version. As a result, they are self-aligning to +/-0,5º. This tilting feature compensates for misalignment, which may be caused by inaccuracies in fitting or manufacturing. Also, al SKF series 3 bearings come in different sizes and designs so you always get the appropriate bearing.

Covered by the series 3: LBCR D, LBCD D, LBCT, LBHT, LBCF, LPAR, LPAT, LUCR D, LUCD D, LUCS D, LUCE D, LUCT, LUCT (BH), LUCF, LUND D, LUNE D, LUNF, LVCR, LVCD, LTCD, LTCF, LQCR, LQCD, LQCF, LQCT.

SKF linear series 3

Hardened SKF precision shafts

The SKF precision shafts can be supplied either as solid or hollow shafts. The range includes different sizes and in addition there may be a choice to be made in the material. The SKF shafts are made from non-alloyed high-grade steels CF53 and there is also the possibility to opt for stainless steel models (X90CrMoV18 and X45Cr13). It is also possible for all shafts to be supplied with modifications.

Covered by the hardened SKF precision shafts: LJM, LJMR en LJMS

SKF hardened precision shafts

Shaft carriers / shaft blocks

The SKF shafts can be mounted in two ways. Shaft blocks support the shaft only at its ends; shaft support typically run the entire length of the shaft. In case of heavily loaded units and/or ling track lengths, it is recommended to use shaft support to eliminate shaft bending. Shaft supports require the use of open linear bearing units.

Covered by this category: LSCS, LSNS, LSHS, LEAS, LEBS, LRCB, en LRCC.

SKF linear shaft carriers and shaft blocks